Non-Marking Vacuum Cup Fabric Covers for Glass and Solar Panels — 12–300 mm
Storleks- och hålmönsterreferens för skyddsöverdrag till vakuumsugkoppar
Vid hantering av glas, speglar och solpaneler ska överdraget passa den befintliga vakuumsugkoppen. Ett modellnamn som enbart anger diametern bekräftar inte hålmönstret. Den här produkten omfattar endast tygöverdraget; vakuumsugkoppen ingår inte.
| Angivet alternativ | Vad som ska kontrolleras |
|---|---|
| Diameter 50 mm | Utgå inte från att detta är samma modell som den separat angivna 50 mm-modellen med flera hål. Kontrollera referensen för den valda modellen. |
| Diameter 50 mm — Multi-Hole | Kontrollera att antalet hål och deras placering stämmer med sugkoppen. |
| Diameter 60 mm — Center Hole / Multi-Hole | Detta är separata alternativ. Bekräfta den centrala öppningen eller mönstret med flera hål innan du beställer. |
Ta med följande uppgifter i din förfrågan
Överdragets diameter; vald modell eller SKU; mitthålets storlek och hålmönster; ett foto av sugkoppens kontaktyta; glasets eller panelens yta; antal; leveransland. Om det är avgörande att undvika märken, beskriv ytfinishen och ordna ett test på det verkliga arbetsstycket före användning i produktion.
Visa modellnamn och SKUs
| Modell / konfiguration | SKU |
|---|---|
| Diameter 12 mm | 6287725123003 |
| Diameter 15 mm | 3796060050804 |
| Diameter 20 mm | 3796060050805 |
| Diameter 25 mm | 3796060050806 |
| Diameter 30 mm | 6038233483145 |
| Diameter 35 mm | 6287725123006 |
| Diameter 40 mm | 3796060050807 |
| Diameter 50 mm | 3796060050808 |
| Diameter 50 mm — Multi-Hole | 6287725123007 |
| Diameter 60 mm — Center Hole | 3796060050809 |
| Diameter 60 mm — Multi-Hole | 6287725123004 |
| Diameter 65 mm | 3796060050810 |
| Diameter 70 mm | 3796060050811 |
| Diameter 75 mm | 6287725123005 |
| Diameter 80 mm | 3796060050812 |
| Diameter 90 mm | 3796060050813 |
| Diameter 95 mm | 3796060050814 |
| Diameter 100 mm | 3796060050815 |
| Diameter 110 mm | 3796060050816 |
| Diameter 120 mm | 3724752328184 |
| Diameter 125 mm | 5036260000121 |
| Diameter 130 mm | 5036260000126 |
| Diameter 150 mm | 5036260000125 |
| Diameter 160 mm | 5036260000128 |
| Diameter 170 mm | 5036260000123 |
| Diameter 200 mm | 5036260000120 |
| Diameter 210 mm | 5036260000127 |
| Diameter 250 mm | 5036260000122 |
| Diameter 260 mm | 5036260000124 |
| Diameter 300 mm | 5036260000129 |
Be BOLTTE bekräfta kompatibiliteten. Använd den befintliga modellväljaren för att välja ett produktalternativ; denna referens lägger inte till någon vara i din varukorg.
Non-Marking Vacuum Cup Fabric Covers — 12–300 mm
These removable fabric covers fit compatible industrial vacuum cups used to handle glass, mirrors and photovoltaic panels. The soft contact layer helps reduce contact marks and abrasion; this listing is for the cover only, not the vacuum cup, holder or fittings.
Check Compatibility Before Ordering
- Match the exact outside diameter of the vacuum cup; the listing covers 12–300 mm sizes.
- Match the hole pattern, not diameter alone. The 50 mm multi-hole and 60 mm center-hole or multi-hole options are separate selections.
- Check center-hole diameter, hole quantity and cover retention against the selected model drawing or identification card.
- Before use, test the complete system on the actual workpiece with the required vacuum performance, payload, acceleration, temperature and operating environment.
For further selection help, see Vacuum cup selection guide.
Suitable for
- Glass and mirror handling
- Photovoltaic panel handling
- Compatible industrial vacuum-cup tooling
Important
This listing is for the removable fabric cover only. Vacuum cups, holders and fittings are not included unless separately stated.
Before Use
Confirm the outside diameter, center-hole diameter, hole quantity and pattern, cover retention, workpiece surface, vacuum performance, payload, acceleration, temperature and operating environment before use. Test the complete vacuum system under actual operating conditions.
Frequently Asked Questions
Can I order by cup diameter alone?
No. Confirm the outside diameter and hole pattern together. Some 50 mm and 60 mm options have different hole configurations, so use the selected model reference before ordering.
Does the cover replace the vacuum cup?
No. It is a removable contact cover for a compatible cup. Vacuum cups, holders and fittings are not included unless separately stated.
Is non-marking performance guaranteed on my panel?
The soft contact layer is intended to help reduce contact marks and abrasion, not to guarantee a mark-free result on every surface. Test the complete vacuum system on the actual glass, mirror or photovoltaic panel before production use.
