Non-Marking Vacuum Cup Fabric Covers for Glass and Solar Panels — 12–300 mm
Storleks- och hålmönsterreferens för skyddsöverdrag till vakuumsugkoppar
Vid hantering av glas, speglar och solpaneler ska överdraget passa den befintliga vakuumsugkoppen. Ett modellnamn som enbart anger diametern bekräftar inte hålmönstret. Den här produkten omfattar endast tygöverdraget; vakuumsugkoppen ingår inte.
| Angivet alternativ | Vad som ska kontrolleras |
|---|---|
| Diameter 50 mm | Kontrollera att antalet hål och deras placering stämmer med sugkoppen. |
| Diameter 60 mm — Center Hole / Multi-Hole | Detta är separata alternativ. Bekräfta den centrala öppningen eller mönstret med flera hål innan du beställer. |
Ta med följande uppgifter i din förfrågan
Överdragets diameter; vald modell eller SKU; mitthålets storlek och hålmönster; ett foto av sugkoppens kontaktyta; glasets eller panelens yta; antal; leveransland. Om det är avgörande att undvika märken, beskriv ytfinishen och ordna ett test på det verkliga arbetsstycket före användning i produktion.
Be BOLTTE bekräfta kompatibiliteten. Använd den befintliga modellväljaren för att välja ett produktalternativ; denna referens lägger inte till någon vara i din varukorg.
Non-Marking Vacuum Cup Fabric Covers — 12–300 mm
These removable fabric covers fit compatible industrial vacuum cups used to handle glass, mirrors and photovoltaic panels. The soft contact layer helps reduce contact marks and abrasion; this listing is for the cover only, not the vacuum cup, holder or fittings.
Looking for an 80, 100 or 125 mm Vacuum Cup Cover?
Open the exact size option below, then check the selected reference image and hole pattern against your existing cup. These links select a cover size; they do not confirm compatibility with a particular vacuum cup.
- 80 mm vacuum cup fabric cover — option: Diameter 80 mm.
- 100 mm vacuum cup fabric cover — option: Diameter 100 mm.
- 125 mm vacuum cup fabric cover — option: Diameter 125 mm.
Other listed sizes are available in the Model selector. For different sizes in one order, select and add each required variant separately, then verify the model and quantity for each cart line.
Check Compatibility Before Ordering
- Match the exact outside diameter of the vacuum cup; the listing covers 12–300 mm sizes.
- Match the hole pattern, not diameter alone. The 60 mm center-hole and multi-hole options are separate selections.
- Check center-hole diameter, hole quantity and cover retention against the selected model drawing or identification card.
- Before use, test the complete system on the actual workpiece with the required vacuum performance, payload, acceleration, temperature and operating environment.
For further selection help, see Vacuum cup selection guide.
Suitable for
- Glass and mirror handling
- Photovoltaic panel handling
- Compatible industrial vacuum-cup tooling
Frequently Asked Questions
Can I order by cup diameter alone?
No. Confirm the outside diameter and hole pattern together. The 60 mm options have different hole configurations, so use the selected model reference before ordering.
Does the cover replace the vacuum cup?
No. It is a removable contact cover for a compatible cup. Vacuum cups, holders and fittings are not included unless separately stated.
Is non-marking performance guaranteed on my panel?
The soft contact layer is intended to help reduce contact marks and abrasion, not to guarantee a mark-free result on every surface. Test the complete vacuum system on the actual glass, mirror or photovoltaic panel before production use.
Need the vacuum cup as well as the cover?
This listing supplies the removable fabric cover only. If you also need a cup, compare the cup shape and exact drawing separately, then verify the cover diameter, hole pattern and retention on that selected cup.
The linked cup families are examples to evaluate, not a confirmed fit list. Do not assume that equal nominal diameters guarantee cover compatibility or mark-free handling.
Product Photos and Size Reference
Fabric covers only. Vacuum cups, holders and fittings shown in the photographs are not included. The source illustrations show size and hole-pattern references; select the exact listed model and confirm compatibility with your cup.
Glass and Solar-Panel Handling: Related Selection Guides
A fabric cover adds a contact layer to a compatible vacuum cup; it is not a replacement for the cup or a complete lifting assembly. Select the exact cover diameter and hole pattern, then validate the covered cup on the actual surface and handling cycle.
- Vacuum cups for glass and smooth panels: surface marking, cup layout and cycle validation
- Vacuum cup maintenance: inspection, cleaning and replacement checks
The application photographs on this page show fabric-covered cups in glass-handling equipment. They are application references, not a cover load rating or a guarantee of mark-free performance on every glass coating or photovoltaic panel.
Modell / konfiguration / SKU
| Modell / konfiguration | SKU |
|---|---|
| Diameter 12 mm | 6287725123003 |
| Diameter 15 mm | 3796060050804 |
| Diameter 20 mm | 3796060050805 |
| Diameter 25 mm | 3796060050806 |
| Diameter 30 mm | 6038233483145 |
| Diameter 35 mm | 6287725123006 |
| Diameter 40 mm | 3796060050807 |
| Diameter 50 mm | 3796060050808 |
| Diameter 60 mm — Center Hole | 3796060050809 |
| Diameter 60 mm — Multi-Hole | 6287725123004 |
| Diameter 70 mm | 3796060050811 |
| Diameter 75 mm | 6287725123005 |
| Diameter 80 mm | 3796060050812 |
| Diameter 90 mm | 3796060050813 |
| Diameter 95 mm | 3796060050814 |
| Diameter 100 mm | 3796060050815 |
| Diameter 110 mm | 3796060050816 |
| Diameter 120 mm | 3724752328184 |
| Diameter 125 mm | 5036260000121 |
| Diameter 130 mm | 5036260000126 |
| Diameter 150 mm | 5036260000125 |
| Diameter 160 mm | 5036260000128 |
| Diameter 170 mm | 5036260000123 |
| Diameter 200 mm | 5036260000120 |
| Diameter 210 mm | 5036260000127 |
| Diameter 250 mm | 5036260000122 |
| Diameter 300 mm | 5036260000129 |