PF-60 80 95 M12x1.25 Vacuum Suction Cups

PF diameter and M12×1.25 connection reference

This PF listing offers three nominal cup diameters with the listed M12×1.25 connection. Select the material suffix as well as the size.

S and N identify the listed silicone and nitrile-rubber options. Nominal diameter is not an effective sealing diameter or a payload rating. A different family with the same cup size may have a different holder and connection.

• Compare PAF 60/80/95 mm holder configurations
• Compare the smaller PBF 10–50 mm range

Applications and Suitable Workpieces

PF-60 80 95 M12x1.25 Vacuum Suction Cups: Flat suction cups provide stable positioning on smooth, flat or only slightly curved non-porous workpieces.

Recommended applications

• Sheet metal, glass, smooth plastic parts, coated panels, electronics panels and other flat industrial components.
• Machine loading and unloading, sorting, assembly, transfer and general automated pick-and-place.
• Thin sheets where a low internal volume and controlled vacuum can help reduce movement during pickup.

Model and selection notes

• PF60, PF80 and PF95 identify diameter; N and S identify nitrile-rubber and silicone versions. All use the listed M12x1.25 connection.
• Select diameter according to the available sealing area, workpiece mass, acceleration and mounting direction.
• Silicone suits clean parts and wider temperature conditions; NBR suits general industrial use, abrasion and lightly oily surfaces; conductive grades are only for static-sensitive handling where identified.
• Rough, porous, deeply curved or perforated surfaces may not seal. Confirm holding force on the actual part with an appropriate safety factor.