Non-standard custom manufacturing
Custom Geotextile CBR Bursting, Puncture, Tensile and Tear Test Fixtures
Made-to-drawing geotextile clamping fixtures, loading probes and machine adapters for selected laboratory tests. Send your drawing or a dimensioned sample specification for a project-specific quotation.
Request a quote. The photographs are manufacturing references, not a ready-to-ship set or a priced pack.
Material, dimensions, tolerances, quantity, finishing, inspection and delivery terms are confirmed in the written quotation before ordering. Direct online purchasing is not available for this custom enquiry listing.
Product and Customization Details
| Product scope | geotextile clamping fixtures, loading probes and machine adapters for selected laboratory tests |
|---|---|
| Material to confirm | Fixture and probe materials, heat treatment and surface finish to be confirmed |
| Custom features | Drawing-specific geometry, machine interfaces, materials and supply configuration; see the reference options below |
| Dimensions and quantity | According to your approved drawing and quotation; no fixed pack quantity is implied |
| Ordering method | Send requirements for review and quotation before production |
Specification Notes
Puncture, CBR bursting, tensile, tear and spherical bursting configurations are separate test arrangements. Identify the selected test method and edition, clamping opening, probe geometry, specimen type, machine connector, working stroke and required force range. The photographs depict the puncture and CBR configurations only; do not infer the geometry of the other source enquiry options. Probe and fixture dimensions must be checked on a confirmed drawing.
Source Reference Specifications
| CBR configuration reference | Ring opening Ø150 mm; support height greater than 100 mm |
|---|---|
| CBR flat-ended plunger reference | Ø50 × 100 mm; top-edge radius 2.5 mm |
| Puncture probe reference | Ø8 mm; top-edge chamfer 0.5 mm × 45° |
| Puncture clamp opening | Source text and illustration differ; opening and tolerance require a confirmed drawing |
| Source test-method references | JTG E50-2006, GB/T 14800-2010 and GB/T 19978-2005; verify the required current edition |
Reference values require confirmation for the selected drawing. Standards mentioned identify the requested test arrangement; they are not certification or proof of compliance.
Reference Configurations for Your Enquiry
Identify the required configuration and quantity in your enquiry. These are not automatically supplied together.
- Puncture strength fixture
- CBR bursting strength fixture
- Trapezoidal tear fixture
- Wide-width tensile fixture
- Spherical bursting fixture for geosynthetics
- Machine adapters quoted to the required interface
Information Needed for Your Quotation
- PDF or CAD drawing with units, revision, all dimensions and the required quantity for each part.
- Exact material grade and condition. Identify any material certification or traceability requirement.
- Critical fits and tolerances, datum references, surface roughness, holes, threads and edge requirements.
- Any heat treatment, coating, plating, polishing or other secondary operations required.
- Required inspection documents, packaging, delivery destination and requested schedule.
Reference Photographs
These original photographs illustrate shapes and machining examples. They do not establish exact dimensions, material grades, tolerances, included quantities or current stock. The delivered part follows the approved drawing and written order specification.
Review and Production Workflow
- Send the drawing or sample requirements, material and quantity.
- Review manufacturability and confirm unresolved dimensions, fits and finishes.
- Approve the written quotation and the final drawing revision.
- Confirm any first-article or inspection requirements before production.
Production, delivery, acceptance and custom-order terms are agreed in the quotation. No fixed lead time, universal tolerance or application certification is implied by the reference images.