Linear Shaft Supports - SK, SHF, Extended Flange and Side-Mount Aluminum and Steel
$1.40 USD
$1.05 USD
25% OFF
Versandkosten werden an der Kasse berechnet
Linear Shaft Supports - SK, SHF, Extended Flange and Side-Mount Aluminum and Steel
Menge
Split-Clamp Linear Shaft Supports
Support and locate round shafts in machinery, positioning fixtures and automation assemblies. Choose an upright, standard flange, extended flange or side-mount configuration to suit the mounting surface and available space. These are fixed shaft supports, not linear sliding bearings.
Choose the configuration
- SK: aluminum upright support with flat mounting base.
- SHF / ZHF: aluminum standard flange support. ZHF is the source designation for the SHF family.
- ZHFT: black-oxide carbon steel standard stepped-flange support.
- ZHFTA: aluminum extended-guide flange support.
- ZHFTL: black-oxide carbon steel extended-guide flange support.
- ZJAM: aluminum side-mount support.
- ZJTB: black-oxide carbon steel side-mount support.
Dimensions and fit
The selected model has its own original source photograph and dimension drawing. Numeric dimensions remain on the original dimension lines. The enlarged bore summary gives millimeters and approximate inches. Original metric tolerances and the indicated H7 bore tolerance, where shown, take precedence. Check bore, overall height, flange width, mounting-hole pitch, counterbore and clamp screw position. Auxiliary symbols without a numeric value are left symbolic; do not infer their values from the picture.
Installation and application
Mount the support to a suitable rigid surface, align the shaft with the other supports, and tighten the split clamp without forcing misalignment. Use the flange version for mounting across the shaft axis, the upright version for a flat base, or the side-mount version when the mounting face is to the side. Extended versions provide a longer guiding body. Confirm alignment, fastening, fit and load suitability for the complete assembly; no load or tightening-torque rating is supplied.
Package and selection notes
Each selected option is one shaft support. The cover illustrates several separate configurations and is not a mixed set. Split count and screw arrangement vary with size and model; inspect the corresponding drawing. Confirm any installation fasteners separately. Photographs show the design and finish; the selected model drawing controls dimensions.
Original product views and representative drawings
Configuration directory
| Model | Bore mm / in | Material | Configuration |
|---|---|---|---|
| SK8 | 8 mm Shaft | Upright Support | 8 / 0.315 | Aluminum alloy | Upright shaft support |
| SK10 | 10 mm Shaft | Upright Support | 10 / 0.394 | Aluminum alloy | Upright shaft support |
| SK12 | 12 mm Shaft | Upright Support | 12 / 0.472 | Aluminum alloy | Upright shaft support |
| SK13 | 13 mm Shaft | Upright Support | 13 / 0.512 | Aluminum alloy | Upright shaft support |
| SK16 | 16 mm Shaft | Upright Support | 16 / 0.630 | Aluminum alloy | Upright shaft support |
| SK20 | 20 mm Shaft | Upright Support | 20 / 0.787 | Aluminum alloy | Upright shaft support |
| SK25 | 25 mm Shaft | Upright Support | 25 / 0.984 | Aluminum alloy | Upright shaft support |
| SK30 | 30 mm Shaft | Upright Support | 30 / 1.181 | Aluminum alloy | Upright shaft support |
| SK35 | 35 mm Shaft | Upright Support | 35 / 1.378 | Aluminum alloy | Upright shaft support |
| SK40 | 40 mm Shaft | Upright Support | 40 / 1.575 | Aluminum alloy | Upright shaft support |
| SK50 | 50 mm Shaft | Upright Support | 50 / 1.969 | Aluminum alloy | Upright shaft support |
| SK60 | 60 mm Shaft | Upright Support | 60 / 2.362 | Aluminum alloy | Upright shaft support |
| SHF8 | 8 mm Shaft | Flange Support | 8 / 0.315 | AC7A aluminum alloy | Standard flange |
| SHF10 | 10 mm Shaft | Flange Support | 10 / 0.394 | AC7A aluminum alloy | Standard flange |
| SHF12 | 12 mm Shaft | Flange Support | 12 / 0.472 | AC7A aluminum alloy | Standard flange |
| SHF13 | 13 mm Shaft | Flange Support | 13 / 0.512 | AC7A aluminum alloy | Standard flange |
| SHF16 | 16 mm Shaft | Flange Support | 16 / 0.630 | AC7A aluminum alloy | Standard flange |
| SHF20 | 20 mm Shaft | Flange Support | 20 / 0.787 | AC7A aluminum alloy | Standard flange |
| SHF25 | 25 mm Shaft | Flange Support | 25 / 0.984 | AC7A aluminum alloy | Standard flange |
| SHF30 | 30 mm Shaft | Flange Support | 30 / 1.181 | AC7A aluminum alloy | Standard flange |
| SHF35 | 35 mm Shaft | Flange Support | 35 / 1.378 | AC7A aluminum alloy | Standard flange |
| SHF40 | 40 mm Shaft | Flange Support | 40 / 1.575 | AC7A aluminum alloy | Standard flange |
| SHF50 | 50 mm Shaft | Flange Support | 50 / 1.969 | AC7A aluminum alloy | Standard flange |
| SHF60 | 60 mm Shaft | Flange Support | 60 / 2.362 | AC7A aluminum alloy | Standard flange |
| ZHFT-12 | 12 mm (0.472 in) | Standard stepped flange | 12 / 0.472 | Carbon steel | Standard stepped flange |
| ZHFT-15 | 15 mm (0.591 in) | Standard stepped flange | 15 / 0.591 | Carbon steel | Standard stepped flange |
| ZHFT-16 | 16 mm (0.630 in) | Standard stepped flange | 16 / 0.630 | Carbon steel | Standard stepped flange |
| ZHFT-20 | 20 mm (0.787 in) | Standard stepped flange | 20 / 0.787 | Carbon steel | Standard stepped flange |
| ZHFT-25 | 25 mm (0.984 in) | Standard stepped flange | 25 / 0.984 | Carbon steel | Standard stepped flange |
| ZHFT-30 | 30 mm (1.181 in) | Standard stepped flange | 30 / 1.181 | Carbon steel | Standard stepped flange |
| ZHFT-35 | 35 mm (1.378 in) | Standard stepped flange | 35 / 1.378 | Carbon steel | Standard stepped flange |
| ZHFT-40 | 40 mm (1.575 in) | Standard stepped flange | 40 / 1.575 | Carbon steel | Standard stepped flange |
| ZHFT-50 | 50 mm (1.969 in) | Standard stepped flange | 50 / 1.969 | Carbon steel | Standard stepped flange |
| ZHF-3 | 3 mm (0.118 in) | Standard flange | 3 / 0.118 | AC7A aluminum alloy | Standard flange |
| ZHF-4 | 4 mm (0.157 in) | Standard flange | 4 / 0.157 | AC7A aluminum alloy | Standard flange |
| ZHF-5 | 5 mm (0.197 in) | Standard flange | 5 / 0.197 | AC7A aluminum alloy | Standard flange |
| ZHF-6 | 6 mm (0.236 in) | Standard flange | 6 / 0.236 | AC7A aluminum alloy | Standard flange |
| ZHF-15 | 15 mm (0.591 in) | Standard flange | 15 / 0.591 | AC7A aluminum alloy | Standard flange |
| ZHF-17 | 17 mm (0.669 in) | Standard flange | 17 / 0.669 | AC7A aluminum alloy | Standard flange |
| ZHF-18 | 18 mm (0.709 in) | Standard flange | 18 / 0.709 | AC7A aluminum alloy | Standard flange |
| ZHF-22 | 22 mm (0.866 in) | Standard flange | 22 / 0.866 | AC7A aluminum alloy | Standard flange |
| ZHF-28 | 28 mm (1.102 in) | Standard flange | 28 / 1.102 | AC7A aluminum alloy | Standard flange |
| ZHF-32 | 32 mm (1.260 in) | Standard flange | 32 / 1.260 | AC7A aluminum alloy | Standard flange |
| ZHFTA-8 | 8 mm (0.315 in) | Extended guide flange | 8 / 0.315 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-10 | 10 mm (0.394 in) | Extended guide flange | 10 / 0.394 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-12 | 12 mm (0.472 in) | Extended guide flange | 12 / 0.472 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-13 | 13 mm (0.512 in) | Extended guide flange | 13 / 0.512 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-15 | 15 mm (0.591 in) | Extended guide flange | 15 / 0.591 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-16 | 16 mm (0.630 in) | Extended guide flange | 16 / 0.630 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-20 | 20 mm (0.787 in) | Extended guide flange | 20 / 0.787 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-25 | 25 mm (0.984 in) | Extended guide flange | 25 / 0.984 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-30 | 30 mm (1.181 in) | Extended guide flange | 30 / 1.181 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-35 | 35 mm (1.378 in) | Extended guide flange | 35 / 1.378 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-40 | 40 mm (1.575 in) | Extended guide flange | 40 / 1.575 | AC7A aluminum alloy | Extended guide flange |
| ZHFTA-50 | 50 mm (1.969 in) | Extended guide flange | 50 / 1.969 | AC7A aluminum alloy | Extended guide flange |
| ZHFTL-8 | 8 mm (0.315 in) | Extended guide flange | 8 / 0.315 | Carbon steel | Extended guide flange |
| ZHFTL-10 | 10 mm (0.394 in) | Extended guide flange | 10 / 0.394 | Carbon steel | Extended guide flange |
| ZHFTL-12 | 12 mm (0.472 in) | Extended guide flange | 12 / 0.472 | Carbon steel | Extended guide flange |
| ZHFTL-15 | 15 mm (0.591 in) | Extended guide flange | 15 / 0.591 | Carbon steel | Extended guide flange |
| ZHFTL-16 | 16 mm (0.630 in) | Extended guide flange | 16 / 0.630 | Carbon steel | Extended guide flange |
| ZHFTL-20 | 20 mm (0.787 in) | Extended guide flange | 20 / 0.787 | Carbon steel | Extended guide flange |
| ZHFTL-25 | 25 mm (0.984 in) | Extended guide flange | 25 / 0.984 | Carbon steel | Extended guide flange |
| ZHFTL-30 | 30 mm (1.181 in) | Extended guide flange | 30 / 1.181 | Carbon steel | Extended guide flange |
| ZHFTL-35 | 35 mm (1.378 in) | Extended guide flange | 35 / 1.378 | Carbon steel | Extended guide flange |
| ZHFTL-40 | 40 mm (1.575 in) | Extended guide flange | 40 / 1.575 | Carbon steel | Extended guide flange |
| ZHFTL-50 | 50 mm (1.969 in) | Extended guide flange | 50 / 1.969 | Carbon steel | Extended guide flange |
| ZJAM-6 | 6 mm (0.236 in) | Side-mount support | 6 / 0.236 | Aluminum alloy | Side-mount support |
| ZJAM-8 | 8 mm (0.315 in) | Side-mount support | 8 / 0.315 | Aluminum alloy | Side-mount support |
| ZJAM-10 | 10 mm (0.394 in) | Side-mount support | 10 / 0.394 | Aluminum alloy | Side-mount support |
| ZJAM-12 | 12 mm (0.472 in) | Side-mount support | 12 / 0.472 | Aluminum alloy | Side-mount support |
| ZJAM-15 | 15 mm (0.591 in) | Side-mount support | 15 / 0.591 | Aluminum alloy | Side-mount support |
| ZJAM-16 | 16 mm (0.630 in) | Side-mount support | 16 / 0.630 | Aluminum alloy | Side-mount support |
| ZJAM-20 | 20 mm (0.787 in) | Side-mount support | 20 / 0.787 | Aluminum alloy | Side-mount support |
| ZJAM-25 | 25 mm (0.984 in) | Side-mount support | 25 / 0.984 | Aluminum alloy | Side-mount support |
| ZJAM-30 | 30 mm (1.181 in) | Side-mount support | 30 / 1.181 | Aluminum alloy | Side-mount support |
| ZJAM-35 | 35 mm (1.378 in) | Side-mount support | 35 / 1.378 | Aluminum alloy | Side-mount support |
| ZJAM-40 | 40 mm (1.575 in) | Side-mount support | 40 / 1.575 | Aluminum alloy | Side-mount support |
| ZJAM-50 | 50 mm (1.969 in) | Side-mount support | 50 / 1.969 | Aluminum alloy | Side-mount support |
| ZJTB-8 | 8 mm (0.315 in) | Side-mount support | 8 / 0.315 | Carbon steel | Side-mount support |
| ZJTB-10 | 10 mm (0.394 in) | Side-mount support | 10 / 0.394 | Carbon steel | Side-mount support |
| ZJTB-12 | 12 mm (0.472 in) | Side-mount support | 12 / 0.472 | Carbon steel | Side-mount support |
| ZJTB-15 | 15 mm (0.591 in) | Side-mount support | 15 / 0.591 | Carbon steel | Side-mount support |
| ZJTB-16 | 16 mm (0.630 in) | Side-mount support | 16 / 0.630 | Carbon steel | Side-mount support |
| ZJTB-20 | 20 mm (0.787 in) | Side-mount support | 20 / 0.787 | Carbon steel | Side-mount support |
| ZJTB-25 | 25 mm (0.984 in) | Side-mount support | 25 / 0.984 | Carbon steel | Side-mount support |
| ZJTB-30 | 30 mm (1.181 in) | Side-mount support | 30 / 1.181 | Carbon steel | Side-mount support |
| ZJTB-35 | 35 mm (1.378 in) | Side-mount support | 35 / 1.378 | Carbon steel | Side-mount support |
| ZJTB-40 | 40 mm (1.575 in) | Side-mount support | 40 / 1.575 | Carbon steel | Side-mount support |
| ZJTB-50 | 50 mm (1.969 in) | Side-mount support | 50 / 1.969 | Carbon steel | Side-mount support |
| SK-3 | 3 mm (0.118 in) | Upright shaft support | 3 / 0.118 | Aluminum alloy | Upright shaft support |
| SK-4 | 4 mm (0.157 in) | Upright shaft support | 4 / 0.157 | Aluminum alloy | Upright shaft support |
| SK-5 | 5 mm (0.197 in) | Upright shaft support | 5 / 0.197 | Aluminum alloy | Upright shaft support |
| SK-6 | 6 mm (0.236 in) | Upright shaft support | 6 / 0.236 | Aluminum alloy | Upright shaft support |
| SK-15 | 15 mm (0.591 in) | Upright shaft support | 15 / 0.591 | Aluminum alloy | Upright shaft support |
Additional original SK / SHF reference
The following reference describes the original 8-60 mm SK and SHF options. The individual model drawing in the gallery provides the added configuration detail.
