RTK-VTL Dual-Outlet Vortex Cooling Guns, 30 / 40

RTK-VTL Dual-Outlet Vortex Cooling Guns, 30 / 40

These two source selections are complete dual-outlet cooling-gun configurations identified as 30 and 40. A vortex gun uses compressed air to produce a cold stream, and a Y-shaped segmented hose directs that stream toward two working locations. A magnetic base and supply valve are shown in the family photographs. An external compressed-air supply is required.

Select the Complete Gun Configuration

30 and 40 are source configuration/model identifiers, not millimetre sizes. The clear original family photo shows the gun fitted with an alternative single hose and a separate dual Y-hose. It is used as an unassembled family reference, without drawing a new connection or product shape. Confirm the supplied dual hose, control style, connections and contents for the chosen 30 or 40 selection. Do not assume an extra single hose or every pictured alternative is included.

Single-outlet VTL04/08/10 and VTL15/25/30/40 internal/external configurations, as well as a hose-only Y accessory, already have separate listings and are not duplicated here.

How It Works

Compressed air enters the vortex body and separates into a cold stream and hot exhaust. The Y-hose splits the cold stream into two positionable outlets. Both branches share the same source; independent closed-loop temperature control is not established. The gun itself is described as using no electrical connection or refrigerant charge. A compressor and appropriate air treatment are still needed. Keep the hot exhaust clear and avoid contact with hot surfaces.

Applications

Source Family References and Limits

The source attributes give a reference working pressure of 6.9 bar (0.69 MPa, approximately 100 psi) and a general 1/4-inch NPT interface. The adjustable medium family drawing instead prints PT1/4, so exact thread form and supplied fitting must be confirmed. Do not assume NPT and PT are interchangeable.

These are the supplier base-family table entries, not separately verified ratings for each dual-outlet configuration. The original table is retained below. Confirm actual consumption, inlet conditions, available compressor delivery and the selected dual configuration before sizing a system. Fixed outlet temperature, temperature drop, response time and branch performance are not promised; the supplied marketing claims vary and the stylized vapor imagery is not a measurement.

Dimensions, Hose and Controls

The original adjustable-medium drawing provides family reference spans of 300 mm hose (11.811 in), 237 mm (9.331 in), 74 mm (2.913 in), 20 mm (0.787 in), 85.5 mm (3.366 in), body diameter 34 mm (1.339 in), other diameter references 30 / 21.5 / 28 mm, an 80 mm base diameter (3.150 in), and a round-outlet reference of 6.35 mm (0.250 in). These original spans are retained as family references, not a confirmed finished drawing for either complete dual model. Obtain the selected configuration drawing before fixing the mounting or required envelope.

The supplied family material shows a magnetic base, supply valve and rear adjustment methods. It does not uniquely confirm one internal/external control version for the two priced dual rows. Confirm the supplied control arrangement. Isolate and depressurize before removing a rear plug or changing internal settings. The general source material description does not establish a certified grade for each component.

Setup and Operation

1. Select dual-outlet configuration 30 or 40 and confirm exact hose, nozzle, control and fitting contents.
2. Confirm allowable pressure and delivered airflow for the supplied unit. Provide suitable controlled, clean and dry compressed air.
3. Secure the magnetic base to a suitable ferromagnetic surface and verify its hold. Keep hot and cold exhaust paths clear.
4. Position both hoses without interference with moving tools, workpieces or guarding. Do not force segmented hose joints.
5. Begin at a controlled setting and measure the actual process result at both outlets. Adjust by the supplied-unit instructions.
6. Isolate and depressurize before servicing controls, hoses or fittings. Do not force the adjustment valve shut.

Supply Scope

One selected complete dual-outlet cooling-gun configuration is priced. Confirm the exact included magnetic base, valve, dual Y-hose and fittings for the selected version. Extra alternative hoses, a separate spare magnet, a compressor, filter/regulator, machinery and workpieces are not specified as included together. The family images illustrate components and processes.

For a selection check, send chosen configuration, cooling task, inlet pressure and confirmed airflow units, mounting space, fitting requirements and the two target positions to boltte@boltte.com.

Original Product, Drawing and Application Images

Clear original gun/Y-hose references, all four actual application photographs, original vortex schematic, adjustable-medium/nozzle drawing, real control close-ups and supplier family table are retained below. Product geometry and original dimension lines are preserved.