HOLDER M3 M4 M5 Mounts and CN Series SMT Vacuum Pickup Nozzles

HOLDER Mounts, CN Vacuum Nozzles and Connecting Sleeves

Separate replacement components for Samsung-type SMT vacuum pickup interfaces: threaded HOLDER mounts, CN pickup nozzles and 25 or 30 mm connecting sleeves. Select the complete model and interface. Similar appearance or cup diameter alone does not establish compatibility.

Holder and Connector Selection

• M3 x P0.35 and M4 x P0.5 holder options use the stated fine metric thread pitches.
• M5 and CP45FV M5 holders are separate source configurations. The CP45FV holder has a different extended construction; do not substitute it solely by thread size.
• Connector options: H25 / bore5, H30 / bore5, or H30 / bore8 mm. Original photographs show retaining screws and the nozzle-side opening.

CN Pickup Tips

OD and ID identify the tip outside diameter and vacuum opening inside diameter. CN400 and CN400N are distinct source models even though both list OD6.2 / ID4.0 mm. Select the exact machine part and compare the physical interface.

Available Configurations

Dimensions and Fit

Source product photographs and original arrows are retained. Inch equivalents use 25.4 mm per inch, rounded to three decimals. Metric thread names such as M3, M4 and M5 are not converted into inch thread specifications. The 22 mm holder reference drawing is cropped to retain the three clear original holder views; use the exact model photograph and machine interface before ordering. A spring-section dimension does not establish rated travel or load.

Material and Compatibility Notes

The source identifies a steel body but does not provide a verified grade, hardness certificate or coating specification. Samsung-type and CP45FV are supplier compatibility references, not a claim of genuine OEM manufacture or universal fit. Confirm thread pitch, sealing seat, tip OD/ID, total height, reflector clearance and machine pickup interface. No certified ESD rating, verified pickup-success rating, wear-life or concentricity rating is included.

Installation and Maintenance

Isolate equipment and follow its replacement procedure. Inspect retention screws, mating slots, seals, spring movement where present, and the vacuum passage. Keep the pickup opening clean and check for wear or chipped tips. Test pickup and release with the actual component before production.

Supply Scope

One selected source component configuration is supplied. Multiple views and family or shaft-assembly photographs do not indicate a multi-piece kit. Long shafts shown for assembly context, machines, workpieces and other separately selected components are not included. CN1100 and the custom oval configuration are omitted because their source model or fit evidence is unresolved.

Original Product, Interface and Assembly Photographs