SMT+ and ZP2 Miniature Vacuum Components
SMT+ and ZP2 miniature vacuum cups in black nitrile rubber for handling small electronic and precision components in space-limited pick-and-place tooling. Choose by complete model code, cup profile, nominal size and the selected engineering drawing.
SMT+ / ZP2 Model Selection Guide
All listed options use black nitrile rubber. Match the complete model code, profile and model-specific drawing before selecting a replacement; nominal size alone does not establish interchangeability.
| Listed model | Selection check |
|---|---|
| SMT+1.0 / 1.5 / 2.0 / 3.5 / 4.0 / 5.0 | Standard SMT+ options with nominal 1.0–5.0 mm cup sizes. Check the exact drawing, mounting interface and installed height. |
| SMT+4 (Double-Layer) | 4 mm double-layer profile. This is a separate option from SMT+4.0. |
| SMT+ -A models | Select the complete -A code, including the double-layer designation where applicable. Check the longer body, AF 7 feature and installed height in that model's drawing. |
| ZP2-B01MUN / B015MUN / B02MUN / B035MUN / B04MUN / B05MUN | Compact flat short pad units. Match the full B-series code and drawing to your tooling. |
| ZP2-B04MBN | Bellows profile for applications that benefit from additional compliance. Do not confuse it with the flat ZP2-B04MUN option. |
Ordering SMT+4.0?
Choose SMT+4.0 — Black Nitrile Rubber in the Model selector. SMT+4.0-A, SMT+4 (Double-Layer), ZP2-B04MUN and ZP2-B04MBN are different selections, not alternative names for SMT+4.0. Check the selected image and model before adding to the cart.
Suitable for
- Miniature electronic and precision components
- Robotic pick-and-place, sorting and assembly
- Compact tooling with limited installation space
Miniature Vacuum Cup Selection FAQ
How do I choose a vacuum cup for electronic components?
Start with the available contact area, component surface and tooling clearance. Compare the exact cup profile and drawing, then verify the mounting interface, vacuum path and operation on the actual component. A small nominal cup size alone does not confirm suitability.
Can I select a replacement using only a 4 mm size?
No. SMT+4.0, SMT+4.0-A, SMT+4 (Double-Layer), ZP2-B04MUN and ZP2-B04MBN are distinct listed options. Match the complete model and its drawing; this listing does not confirm that they are interchangeable.
What should I provide for model-selection help?
Provide the complete existing model code, a clear photo or drawing of the cup and mounting interface, the workpiece material and dimensions, and the required quantity. Include your operating vacuum and application requirements for review; no model-specific suction-force or payload rating is provided here.
For the general selection process, read the vacuum cup selection guide: shape, material, size and load.
Before Use
Confirm the complete model code and its selected drawing, cup profile, material, mounting interface, vacuum path, workpiece surface, payload, acceleration, temperature and operating environment before installation. No food-contact, medical, lifting-safety or regulatory certification is claimed.
