Custom-Made Vacuum Suction Pad Assembly
USD 860.00 per piece. One purchase unit is one custom vacuum pad assembly based on the supplied reference design. This is a made-to-order product, not an off-the-shelf suction cup.
Reference configuration
| Product | Custom rectangular vacuum suction pad assembly |
|---|---|
| Overall pad dimensions, including seal | 300 x 500 mm / 11.811 x 19.685 in |
| Contact-face arrangement | Blue perimeter seal, thin rubber pad and steel or aluminum backing plate. The final plate material is agreed with the customer before manufacture. |
| Vacuum ports shown | 2 x 3/8 in NPT (US); exact positions per final reference |
| Rear arrangement shown | Inset steel or aluminum backing plate, 10 seal-fixing mounting holes and a centered mounting bracket with extended square tube. Plate material is confirmed with the customer before manufacture. |
| Bracket reference dimensions | Approximately 100 mm wide x 130 mm high / 3.94 x 5.12 in, as labeled in the bracket reference sheet |
| Quantity per purchase unit | 1 custom assembly |
Production time
Estimated production time: approximately 15-20 days. This is the manufacturing period, not the shipping transit time.
Custom manufacturing and confirmation
The three supplied images are reference design schematics, not photographs of a completed unit or final manufacturing drawings. Manufacture is subject to confirmation of the final mounting interface and drawing details.
Backing-plate material: steel or aluminum. The final material is selected in consultation with the customer and confirmed before manufacture. Aluminum labels in the reference schematics are illustrative; the agreed material governs the finished custom assembly.
- The square-tube side dimension A and tube locating-hole diameter are not specified and must be confirmed.
- Confirm plate and pad thicknesses, mounting-hole sizes and positions, corner radii, sealing-lip geometry and protrusion, and any required tolerances before manufacture.
- The bracket is shown centered in both directions, with equal square-tube extension at both ends. Do not infer unspecified dimensions from the illustration scale.
- The reference design leaves a gap around the thin rubber pad; pad openings align with the vacuum ports and remain unobstructed.
- No tested lifting capacity, load rating, vacuum specification, seal compound, hardness or temperature rating is specified in the supplied material.
Ordering
Price is per piece. Please provide the final drawing requirements or confirm the remaining dimensions for this custom assembly. Shipping charges and any applicable taxes are shown separately at checkout; this listing does not state that shipping is included.
Contact face and assembly schematic
Rear assembly and mounting arrangement
Bracket and square-tube reference
Model / configuration / SKU
| Model / configuration | SKU |
|---|---|
| Custom Vacuum Pad / 300 x 500 mm / 1 Piece | BOLTTE-CUSTOM-VPAD-300X500-20261029 |