Electric Vacuum Camera Mounts and Mounting Kits
Attach a camera, phone clamp or light mounting arm to a smooth non-porous surface using a powered vacuum base. These multi-port bases have a status display, USB Type-C connection and electric evacuation with pressure monitoring. Choose the cup diameter, Standard or Altitude-mode version, and the required package.
Three package choices
- Camera kit: one selected vacuum base, dual-ball mounting arm, phone clamp, action-camera adapter and USB cable.
- Cup only: one selected electric vacuum base and USB cable. The mounting arm, phone clamp and action-camera adapter are separate.
- Accessory kit: one dual-ball arm, one phone clamp and one action-camera adapter. No suction cup or camera is included.
Sizes and mounting interfaces
The 3, 4.5, 5 and 6-inch names are nominal product-family labels. The selected individual sheets specify cup diameters of 75, 115, 127 and 150 mm respectively (2.953, 4.528, 5.000 and 5.906 in). Match the actual metric diameter and available mounting area. The top plate shows 1/4-inch and 3/8-inch mounting holes and anti-twist locating holes; check the actual fastener and arm fit before use.
Versions and operation
Standard and Altitude-mode versions are separate selectable configurations. Select the intended operating version rather than assuming every base has the same mode. The supplied controls describe long press for power, a single press to evacuate and a double press to release. Check the device instructions and display for the selected configuration. Confirm firm adhesion before mounting equipment, keep the release function accessible and support the equipment before venting.
Applications and surface preparation
Typical temporary mounting uses include glass, smooth vehicle panels and sealed smooth tables. The supplied camera/vehicle illustrations show possible mounting arrangements; cameras, phones, lights and vehicles are not included. Clean and dry the pad and mounting surface. Use only flat, smooth, non-porous surfaces. Do not remove the suction-port filter or use damaged pads. Textured paint, porous stone, unsealed timber, wallpaper and frosted or rough glass may not seal.
Keep mounted equipment supported by a separate safety tether where a release could cause damage. Check the seal and display regularly; the supplied use notes recommend checking static installations at least every two hours. A monitoring function is not a guarantee against detachment. Determine the working load for the actual surface, orientation, equipment leverage and mounting conditions. Do not infer a safe moving-vehicle load or speed from a static illustration.
Original product views and mounting examples
Every selectable configuration is shown with its package and diameter. Approximate inch conversions supplement the metric dimensions.




















Configurations and prices
| Configuration | Package | USD sale | Original USD |
|---|
| 3-inch nominal / 75 mm | Standard | Camera kit | Camera mounting kit | $195.00 | $260 |
| 4.5-inch nominal / 115 mm | Standard | Camera kit | Camera mounting kit | $204.75 | $273 |
| 5-inch nominal / 127 mm | Standard | Camera kit | Camera mounting kit | $213.75 | $285 |
| 6-inch nominal / 150 mm | Standard | Camera kit | Camera mounting kit | $223.50 | $298 |
| 3-inch nominal / 75 mm | Altitude mode | Camera kit | Camera mounting kit | $195.00 | $260 |
| 4.5-inch nominal / 115 mm | Altitude mode | Camera kit | Camera mounting kit | $204.75 | $273 |
| 5-inch nominal / 127 mm | Altitude mode | Camera kit | Camera mounting kit | $213.75 | $285 |
| 6-inch nominal / 150 mm | Altitude mode | Camera kit | Camera mounting kit | $223.50 | $298 |
| 3-inch nominal / 75 mm | Standard | Cup only | Vacuum mount only | $157.50 | $210 |
| 4.5-inch nominal / 115 mm | Standard | Cup only | Vacuum mount only | $167.25 | $223 |
| 5-inch nominal / 127 mm | Standard | Cup only | Vacuum mount only | $176.25 | $235 |
| 6-inch nominal / 150 mm | Standard | Cup only | Vacuum mount only | $186.00 | $248 |
| 3-inch nominal / 75 mm | Altitude mode | Cup only | Vacuum mount only | $157.50 | $210 |
| 4.5-inch nominal / 115 mm | Altitude mode | Cup only | Vacuum mount only | $167.25 | $223 |
| 5-inch nominal / 127 mm | Altitude mode | Cup only | Vacuum mount only | $176.25 | $235 |
| 6-inch nominal / 150 mm | Altitude mode | Cup only | Vacuum mount only | $186.00 | $248 |
| Accessory kit | Dual-ball arm, phone clamp, action-camera adapter | Accessory kit only | $32.85 | $43.8 |