Non-standard custom manufacturing
Custom Adhesive Lap-Shear Test Grips, Bonding Fixtures and Specimen Coupons
Made-to-drawing rigid-adherend tensile grips, specimen alignment fixtures, spacers and adhesive test coupons. Send your drawing or a dimensioned sample specification for a project-specific quotation.
Request a quote. The photographs are manufacturing references, not a ready-to-ship set or a priced pack.
Material, dimensions, tolerances, quantity, finishing, inspection and delivery terms are confirmed in the written quotation before ordering. Direct online purchasing is not available for this custom enquiry listing.
Product and Customization Details
| Product scope | rigid-adherend tensile grips, specimen alignment fixtures, spacers and adhesive test coupons |
|---|---|
| Material to confirm | Fixture and coupon materials are selected individually; stainless steel, aluminum, copper and other source coupon options are not interchangeable |
| Custom features | Drawing-specific geometry, machine interfaces, materials and supply configuration; see the reference options below |
| Dimensions and quantity | According to your approved drawing and quotation; no fixed pack quantity is implied |
| Ordering method | Send requirements for review and quotation before production |
Specification Notes
Select the grip, stepped alignment plate, fixing device, spacer or specimen coupon separately. Confirm adherend material and thickness, bond overlap, adhesive procedure, surface preparation, grip alignment and machine interface. The source references GB/T 7124; verify the required edition and complete test geometry. Reference kit options have specified components but are not the default contents of this enquiry page. Photographs show the metal grips only, not every coupon material. Final supply scope and quantities are itemized in the quotation.
Source Reference Specifications
| Grip connector reference | M12; confirm machine interface |
|---|---|
| Source grip reference | 50 mm maximum specimen width, subject to drawing verification |
| Coupon nominal dimensions | 100 × 25 mm; source thickness options 1.6 or 2 mm, depending on material |
Reference values require confirmation for the selected drawing. Standards mentioned identify the requested test arrangement; they are not certification or proof of compliance.
Reference Configurations for Your Enquiry
Identify the required configuration and quantity in your enquiry. These are not automatically supplied together.
- Rigid-to-rigid tensile grip
- Adhesive lap-shear alignment plate — 1.6 mm step
- Adhesive lap-shear alignment plate — 2 mm step
- Specimen fixing device
- Reference kit: 1.6 mm alignment plate, 10 stainless-steel strips and 5 spacers
- Reference kit with the above items plus the fixing device
- Locating spacer
- Stainless steel coupons: 100 × 25 × 1.6 or 2 mm; plain, drilled or sandblasted variants
- 5052 aluminum coupons: 100 × 25 × 1.6 or 2 mm
- Glass coupon: 100 × 25 × 1.6 mm
- T2 copper coupon: 100 × 25 × 1.6 mm
- PTFE coupon: 100 × 25 × 2 mm
- Wood coupon: 100 × 25 × 1.6 mm
- Acrylic, sandblasted/oxidized aluminum, PVC, PS, PET, PC or PE coupon: 100 × 25 × 2 mm
- Carbon steel coupons: 100 × 25 × 1.6 or 2 mm; plain or sandblasted/oxidized reference finish
Information Needed for Your Quotation
- PDF or CAD drawing with units, revision, all dimensions and the required quantity for each part.
- Exact material grade and condition. Identify any material certification or traceability requirement.
- Critical fits and tolerances, datum references, surface roughness, holes, threads and edge requirements.
- Any heat treatment, coating, plating, polishing or other secondary operations required.
- Required inspection documents, packaging, delivery destination and requested schedule.
Reference Photographs
These original photographs illustrate shapes and machining examples. They do not establish exact dimensions, material grades, tolerances, included quantities or current stock. The delivered part follows the approved drawing and written order specification.
Review and Production Workflow
- Send the drawing or sample requirements, material and quantity.
- Review manufacturability and confirm unresolved dimensions, fits and finishes.
- Approve the written quotation and the final drawing revision.
- Confirm any first-article or inspection requirements before production.
Production, delivery, acceptance and custom-order terms are agreed in the quotation. No fixed lead time, universal tolerance or application certification is implied by the reference images.