Plastic Reducing T and F Hose-Barb Connectors, White T and Translucent PP F

Plastic Reducing T- and F-Type Hose-Barb Connectors

Choose an individual white T-shaped connector or a translucent PP F-shaped connector. These are two different three-way connection profiles, not a two-piece kit. Tubing and installation accessories are not included.

Available Models

White T-Type Connector

The original source model is 3.2-1.6-3.2T. Its drawing separately shows the side connection values 2.5, 1.8 and 1.2 mm, and straight-end values 4.7, 3.2 and 2.4 mm. The branch extension is 5 mm and upper section length is 10 mm. Model designations are retained separately from these measured profiles. Do not replace the original 1.8 mm value with the 1.6 model designation or assume every end value is a hose inside diameter.

Translucent PP F-Type Connector

The source describes this model as main 4 to 2 mm. The original image shows two side branches on the same side of the body and one lower connection. Lower connection dimensions are 4.8, 3.9 and 2.8 mm, with a 9.8 mm section. Side/profile values include 3.8, 2.9, 2 and 1 mm, with a 10 mm upper branch extension. Follow the original dimension arrows for the individual profiles rather than interpreting the model designation as a complete bore or tubing specification.

Selection and Installation

Check the connector shape, each connection profile, tubing flexibility, retention and available body clearance. The T-type and F-type profiles are not interchangeable solely because they are both three-way fittings. Family photographs show assorted examples only and do not establish the dimensions or polymer of a selected model.

Material and Service Conditions

Only the F-type selected option explicitly specifies PP. The white T-type option does not identify an exact polymer, so it is not described as nylon or assigned the rating of the separately listed nylon model. No pressure rating, certified temperature range, tested chemical compatibility, food-contact or medical certification is supplied. Confirm the fluid, connections and operating conditions before use.

Original Product Photographs and Dimension References

The first two images correspond to the available T and F options. Product geometry, photographs, original metric values, arrows and dimension lines are preserved. Inch equivalents are approximate and rounded to three decimal places. The final two original photographs show assorted family shapes and installation profiles only. They are not an assorted kit or a list of included parts.