Plastic Tubing Extension Assemblies, 70-300 mm, and Separate Clear Adapter

Plastic Tubing Extension Assemblies and Separate Clear Adapter

Select a source-numbered rigid or flexible tubing component, or a separate clear adapter. Lengths and end configurations differ by option. Each selection is one item, not the entire family pictured. The separate adapter does not include tubing.

Available Tubing Models

End Configurations and Lengths

Model #1 is the green flexible 70 mm option with mixed male/female end fittings. #2 is a rigid 100 mm component with a single fitting and an open tube end. #3 is the rigid 100 mm dual-female option. #4 and #5 are flexible 100 mm versions with mixed or matching female ends. #6 has straight mixed end fittings and #7 has an elbow fitting, both listed at approximately 150 mm. #8 and #9 are 200 mm flexible versions, while #10 and #11 are 300 mm flexible versions. Matching or mixed end descriptions follow the source option nomenclature. Compare the actual connector photographs and mating profiles before ordering; they do not establish ISO compliance, a thread pitch or a G-thread size.

Tube Dimensions

Models #4, #5, #8, #9, #10 and #11 specify 2 mm inside diameter and 4 mm outside diameter, approximately 0.079 and 0.157 inches. The selected source options do not give the tubing ID/OD for #1, #2, #3, #6 or #7. The 3.2 marking in the original #6/#7 captions is not used as a verified tubing bore or thread standard. Listed lengths are source nominal/approximate values; no assembly-length tolerance or exact distinction between tube cut length and complete end-to-end length is supplied.

Separate Clear Adapter

The adapter-only selection shows a 6.2 mm outside profile and a 3.8 mm bore or insertion opening, approximately 0.244 and 0.150 inches. Original dimension arrows remain in its photograph. This is a separate connector, not a tube assembly. No overall body length, seal grade or universal fit with the other photographed components is established. Check the actual mating part and insertion arrangement.

Materials and Operating Conditions

The source family contains rigid and flexible plastics, with some other unselected options explicitly naming PC or PVC. A single family-level PVC attribute does not establish the exact tubing, connector or seal polymer in every selected option, so no specific grade is assigned here. Colour and appearance follow the individual original photographs. Pressure, temperature, chemical compatibility, corrosion resistance, sterility, food-contact and medical certification are not verified. Confirm suitability for the intended industrial fluid and operating conditions.

Original Product Photographs

The first twelve images correspond to the eleven available tubing models and the adapter-only option. Original product bodies, connector details and any dimension arrows are retained without resizing or redrawing the source photographs. Chinese captions are replaced with English captions below the product area. Inch conversions are approximate and rounded to three decimals. The final family photograph is an appearance reference, not a kit-content list or a scale comparison.