Double-Ended Female Luer-Style Connectors, Black No.1 and Translucent No.2

Double-Ended Female Luer-Style Connectors

Choose one black No.1 or translucent No.2 straight connector. Both ends follow the source female/external-thread Luer-style designation. The two options have different body profiles and dimensions; they are not a two-piece set. Tubing and mating connectors are not included.

Available Models and Original Reference Values

Black No.1

The black connector is shown in the clean original photograph with two end profiles and a central grip flange. Its corresponding original drawing shows 16.4 mm overall length, 11 mm central width, 3.6 mm central section and a 4.1 mm lower-end opening. These figures are separate profile measurements, not a complete tubing-ID specification.

Translucent No.2

The clean original dimension photograph explicitly identifies No.2 double-ended female/external-thread style. It shows 20 mm overall length, 10.7 mm central width, 4.1 mm grip section and a separate 4.1 mm lower-end opening. The original arrows are retained, without substituting the shorter No.1 drawing.

Materials and Mating Parts

The selected options describe plastic bodies but do not identify a polymer grade for both configurations. They are not assigned PP or PC based on other source options or their colour. Female and external-thread descriptions follow the supplied source; they do not certify an ISO taper, thread pitch, universal syringe fit or interchangeability. Confirm the actual mating connector and sealing requirements.

Operating Conditions and Scope

These are connector options, not sealing plugs, caps or valves. No sterile packaging, medical intended use, pressure/vacuum rating, temperature range, chemical-compatibility result or food-contact certification is supplied for these selected models. Black colour does not establish light-blocking or UV performance. The packaged sterile-labelled source options, T/Y/elbow adapters, 1/4-28UNF, G1/4, M5, M6 and 10-32 adapters are not included in this listing.

Original Product Photographs

The selectable model photographs preserve the original products without redrawing or invented geometry. Where shown, original metric values, arrows and dimension lines remain unchanged. Additional reference values are transcribed from corresponding original drawings. Inch equivalents are approximate and rounded to three decimals. Any final family photograph shows assorted examples only, not kit contents, a scale comparison or specifications for unlisted models.