M5 Spring-Loaded Vacuum Nozzle Assemblies, M6/M5 Holder and 5.4 mm Stem Cores

M5 Spring-Loaded Vacuum Nozzle Assemblies, Holder and Replacement Cores

Choose a complete silver-body M5 male-mounted assembly, an M6/M5 male-thread holder without a cup, or a separate replacement core with a 5.4 mm / 0.213 in stem. Each option is one selected component configuration. Original product photographs and dimension leaders are retained; family and multi-view photographs do not indicate a kit or package quantity.

Model Selection and Dimensions

Complete Assembly Construction

The assembly includes the black cup, compression spring, locating components and silver mounting body shown in the exact option photograph. The mounting end is marked M5 male. Small 1–5 mm cup assemblies are shown with H36 mm / 1.417 in overall height and 7.5 mm / 0.295 in body diameter. The large 5 mm and 6–16 mm cup assemblies show H40 mm / 1.575 in height and 11 mm / 0.433 in body diameter. The small and large 5 mm assemblies have different mounting-body and spring configurations; they are not interchangeable by cup diameter alone.

Original spring-buffer annotations are 5 mm / 0.197 in for the small family and 4 mm / 0.157 in for the large family. These source drawing values do not establish tested working travel or spring force. Several small-family drawings mark the lower mounting segment as 6 or 7 mm; follow the exact selected image rather than assuming a common thread engagement length. M5 and M6 are metric thread designations, not inch-thread equivalents; thread pitch is not supplied.

Holder-Only Option

The holder photograph shows an upper M6 male interface, lower M5 male mounting end, H38.5 mm / 1.516 in overall height, 11 mm / 0.433 in body diameter and a 4 mm / 0.157 in buffer annotation. The two end segments are marked 5 mm / 0.197 in. The black suction cup is not included with this holder-only option.

5.4 mm Stem Replacement Cores

The five separate cores use nominal cup sizes 6, 8, 10, 13 and 16 mm with stems marked 5.4 mm / 0.213 in. They retain the cup, spring and locating construction shown in the exact photograph, without the outer M5 mounting body. They are not the separate 3.2 mm-stem cores. Core overall length and bore size are not provided; confirm fit against the equipment. Small 2.5 mm-stem cores are already separately listed and are not duplicated here.

Application and Fit Checks

For equipment-matched vacuum pickup in SMT, component feeding, labeling and automated small-part handling. Compare the selected cup contact area, mounting thread, mounting-body diameter, height, core diameter, locating features and available movement before ordering. These products are not claimed as genuine OEM parts or universally compatible with a machine brand.

Materials and Limits

The original photographs show black elastomer cups and metal mounting components. No independently verified material grade, electrical-resistance test, temperature rating, suction force or pickup-success percentage is provided. Confirm process and ESD requirements before installation. Inch values are rounded conversions at 25.4 mm per inch, not manufacturing tolerances.

Installation and Maintenance

Isolate the equipment before replacement. Keep the vacuum passage and cup surface clean. Inspect retention screws, locating features, threads, spring movement and sealing surfaces. Verify secure mounting, vacuum sealing, pickup and release with the actual workpiece before production. Replace worn or damaged components.

Supply Scope and Original Photographs

One selected complete assembly, holder or core configuration is supplied. Pictured alternative sizes and components are not included. Generic 500-series options without individual product photographs and unspecified custom configurations are omitted. Unsupported promotional claims are not reproduced.